66-6004

REPLACEMENT FILTER FOR 2012-2019 ARCTIC CAT WILDCAT

$75.00 USD
  • Efficiency Rating icon

    Efficiency Rating

    99.98%

66-6004

REPLACEMENT FILTER FOR 2012-2019 ARCTIC CAT WILDCAT

$75.00 USD

Note:
Does not fit Wildcat XX, see 66-6003LG.
Replaces OEM 0470-942.
Item is backordered, orders typically ship in two weeks.

Est. Delivery: ,
if ordered within hours and minutes
Not Shipping to ?
Filter type Dry Cleanable
YearMakeModelEngine
2012-2019Arctic CatWildcatUTV

WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm.

MORE INFO at www.P65warnings.ca..gov
REPLACEMENT FILTER FOR 2012-2019 ARCTIC CAT WILDCAT
$75.00 USD
$75.00 USD

S&B's Huge Dry, Cleanable Filter flows the best.

S&B's dry cleanable filter flows great and has a higher efficiency rating at 99.98%, compared to the stock filter at 99.42%.

FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3

Our filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not reuse it.

STEP 1

First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.

STEP 2

Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30psi.

STEP 3

Use the nozzle to blow out the outside of the filter at an angle to remove any large debris that was not removed in Steps 1 and 2. Be careful not to blow debris back into the media. Then blow out once more from the inside out.

STEP 4

Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.

Step 5

Wash the outside of the filter to remove the remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

CUSTOMER REVIEWS