66-6006

Replacement Filter for 2014-2023 Polaris RZR XP 1000 / Turbo, Pro XP / RS1, Turbo R

$75.00 USD
  • Airflow Improvement icon

    Airflow Improvement

    9.57%

  • Efficiency Rating icon

    Efficiency Rating

    99.96%

66-6006

Replacement Filter for 2014-2023 Polaris RZR XP 1000 / Turbo, Pro XP / RS1, Turbo R

$75.00 USD
In Stock!

Est. Delivery: ,
if ordered within hours and minutes
Not Shipping to ?
Filter type Dry Cleanable
YearMakeModelEngine
2020-2023PolarisRZR Pro XPUTV
2014-2023PolarisRZR XP 1000UTV
2018-2023PolarisRZR XP Turbo SUTV
2016-2023PolarisRZR XP TurboUTV
2018-2023PolarisRS1UTV
2022-2023PolarisRZR Turbo RUTV

WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm.

MORE INFO at www.P65warnings.ca..gov
Replacement Filter for 2014-2023 Polaris RZR XP 1000 / Turbo, Pro XP / RS1, Turbo R
$75.00 USD
$75.00 USD

S&B's Huge Dry, Cleanable Filter flows the best.

Using our proprietary dry synthetic media, our RZR filter flows 6.56% better than stock and provides 10.53% more air the Donaldson's filter.

splide tile

FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3

Our RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not reuse it.

splide tile

STEP 1

First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.

splide tile

STEP 2

Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30psi.

splide tile

STEP 3

Use the nozzle to blow out the outside of the filter at an angle to remove any large debris that was not removed in Steps 1 and 2. Be careful not to blow debris back into the media. Then blow out once more from the inside out.

splide tile

STEP 4

Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.

splide tile

Step 5

Wash the outside of the filter to remove the remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

You should dispose of the filter after servicing it 10 times in order to ensure your engine is properly protected. Prior to you reinstalling your air filter, carefully inspect the cage, pleats, and silicone rubber for any damage. If you see damage to the cage, pleats, or rubber, do not use the filter!

splide tile

CUSTOMER REVIEWS