66-6005

REPLACEMENT FILTER FOR 2017-2024 CAN-AM MAVERICK X3, 2024 MAVERICK R, 2021-2024 COMMANDER 1000R, SPORT 1000R

$75.00 USD
  • Airflow Improvement icon

    Airflow Improvement

    13%

  • Efficiency Rating icon

    Efficiency Rating

    99.92%

66-6005

REPLACEMENT FILTER FOR 2017-2024 CAN-AM MAVERICK X3, 2024 MAVERICK R, 2021-2024 COMMANDER 1000R, SPORT 1000R

$75.00 USD

Replaces 715900422.

Can-Am® is a registered trademark of BRP.
In Stock!

Est. Delivery: ,
if ordered within hours and minutes
Not Shipping to ?
Filter type Dry Cleanable
YearMakeModelEngine
2017-2024Can-AmMaverick X3UTV
2024Can-AmMaverick RUTV
2021-2024Can-AmCommander 1000RUTV
2018-2024Can-AmMaverick Sport DPSUTV
2019-2024Can-AmMaverick SportUTV

WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm.

MORE INFO at www.P65warnings.ca..gov
REPLACEMENT FILTER FOR 2017-2024 CAN-AM MAVERICK X3, 2024 MAVERICK R, 2021-2024 COMMANDER 1000R, SPORT 1000R
$75.00 USD
$75.00 USD

WATCH THE VIDEO ON HOW TO CHANGE OUR CLEANABLE FILTER.

Using our proprietary dry synthetic media, our Maverick filter flows better than stock and provides 13% more air to the filter. The filter is very easy to change.

FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3

Our RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not reuse it.

STEP 1

First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.

STEP 2

Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30psi.

STEP 3

If you want to maximize the airflow of your filter, we recommend completing the following steps every other time you service your filter.

STEP 4

Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.

Step 5

Wash the outside of the filter to remove the remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

CUSTOMER REVIEWS