Before You Start

• Please read the entire product guide before proceeding.
• Ensure all parts are present.
• If you are missing any of the components, call our customer support at (909) 947-0015.
• Do not work on your vehicle while the engine is hot.
• Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.

This intake kit may not fit with the following aftermarket parts installed:

• Body Lift or Lowering Kit
• Custom Hood
• Intercooler or Turbo upgrades

Tools Required

• T27 Torx Bit and Driver
• 5/16” Nut Driver or Socket and Driver
• 1/4” Nut Driver or Socket and Driver
• 2x 10mm sockets + Socket Wrench, Driver or wrench
• 13mm socket or Driver
• Panel Popper
• Flathead Screwdriver
• Phillips Head Screwdriver
• Knife, Cutting tool

Note: Approximate Install Time: 1 hour 30 Minutes