Install Instructions for AS-1019

Print

Before You Start

RAM AIR SCOOP

VEHILCE FITMENT:  2019-2023 2.3L Ecoboost, Ford, Ranger

Required Tools

  • 7mm, 10mm, Socket and Wrench
  • 10” Socket Extension or 4” + 6” Socket Extensions
  • Panel Popper
  • Pick
  • Small Flat Blade Screwdriver

Step 1

Remove the factory shroud by removing the rivets holding it down.

Step 2

Remove the OEM bolt. 

Step 3

Remove the stock intercooler from the vehicle.

Step 4

Slide the provided O-ring into the O-ring groove inside the pipe. 

Step 5

Install the S&B boot onto the intercooler with no hose clamp springs. 

Step 6

Install the new clip onto the S&B intercooler. 

Step 7

Slightly slide the S&B intercooler onto the collar at the turbo. 

Step 8

Then connect the intercooler to the boot using a flathead screwdriver and clip the assembly into the turbo. Make sure you hear a click sound when it connects. 

Step 9

Using an 11mm, remove the nuts on the springs in order to make them easier to install. 

Step 10

Once both hose clamp springs are broken down, install them onto the boot. 

Step 11

Once the hose clamp springs are installed on the boot, reinstall the springs and nuts then tighten down to 76 Inch-Pounds.

CARB EO LABEL

Please affix the included CARB-approved EO label in an area under the hood. We recommend placing it on the radiator shroud, or the underside of the vehicle's hood near the S&B product.